Lowes Dining Room Lights need not be made from glass or crystal. Therefore do not need to be taken down for extensive cleaning when the glass becomes dusty. Instead, design and make a distinct chandelier using recycled material, one that holds real light instead. This chandelier is functional, as is unusual, especially in winter, when electricity can be affected by the weather, and it spreads interesting light and shade in the room.
Peel the tire from the bicycle wheel and remove the inner tube; recover them. Clean and polish the wheel and spokes, remove rust spots with a saucepan scourer and protect the metal with a touch of penetrating oil. Use the bolt cutter to cut three lengths, of 2.5 galvanized chain to hang the Lowes Dining Lights; this makes it possible for a maximum weight of 30 kg. Attach a carabineer at three equidistant points around the rim, and attach a length of chain to each carabineer.
Direct the other ends of the chain lengths to a central carabineer. Measure the distance between the ceiling and the point where you will hang the Dining Room Lights from the top carabineer, and double the measurement. Cut the length of the chain and double it. Attach both ends of the chain to the central carabineer. Make sure the cans are clean and you have removed the labels and tops. Steel cans are the brightest, but aluminum will do the job just as well. Fill each can to the board with water and freeze to give you a firm working surface, then use an awl and hammer to strike patterns in the sides to let the light through.